The "Web Frame" component is intended for incorporation of web interface into the template, based on web content or local HTML code.
To adjust the web interface settings:
- Open the "Settings" tab.
- In the "Type" field, select URL if web content is the source, or "HTML code" if local HTML code is the source.
- For web content: Type URL address of the starting web resource in the URL field.
- For HTML code: Type page code in the "Code" field.
- none – no reload;
- Reload every module opening;
- Reload every user session.
- Embedded WebKit – embedded engine of Addreality Player;
- System – web browser of the OS installed at the media display point.
- default – enforced actions are not used;
- Clear cache;
- Save cache.
- default – enforced actions are not used;
- Clear cookies.
This component enables control of clickthroughs, redirecting users to components of the project template.
Control settings are adjusted in the "Handle links" block, after the component’s web interface is set up.
Before clickthrough control settings are set, components to which users will be redirected must be added to the template first.
To set the controls:
- Open the "Settings" tab.
- Add links to the "Handle links" section by one of the following methods:
- To add automatically all links found at the specified URL, click "Parse links".
- To add links manually, click the "Plus" button and type the link into the URL field that appears.
- For each link you need to set a redirect form click the button that creates a link to a component.
- Choose the template component that the user shall be redirected to upon clicking/pressing the selected link.
- The redirect will be set up.
- Click "OK" or "Allow" to save the changes made.
The newly-created link between components will be shown on the Desktop.
Links to external components can be changed in the way similar to the process described above.
To remove link from "Handle links" section, select the link and click the "Minus" button. The link will be deleted.
This component enables transfer of parameters to a web resource.
This is only available for web interface based on web content (URL chosen in the "Type" field).
To set the transferred parameters:
- Open the "Parameters" tab.
- In the "Request method" field, select the method for parameter transfer:
- GET;
- POST;
- PUT;
- DELETE;
- HEAD;
- OPTIONS.
- empty – own parameter;
- DEVICE NAME – for transfer of parameter with media display point name;
- PROJECT NAME – for transfer of parameter with project template name.
For each parameter, enter its name into the "Parameter" field, and its value, into the "Value" field.
Transfer parameter settings will be adjusted.
Click "Apply" or "OK" to save the changes made.
Parameters can be changed in the way similar to the process described above.
To remove a parameter, select the corresponding row and click the "Minus" button. The parameter will be deleted.
This component enables you to create a white/black list of permitted/forbidden URLs, including using string templates. You can set up either for whitelisting or blacklisting, simultaneous use of permitted and forbidden URLs within one component is not allowed.
To configure:
- Open the "URL Filter" tag.
- In the "Filter table type" choose the template type:
- Black list – URLs corresponding to the template will be blocked;
- White list – URLs corresponding to the template will be available for access.

Templates can be changed in the way similar to the process described above.
To remove a template, select the corresponding row and click the "Minus" button. The template will be deleted.
Comments
0 comments
Please sign in to leave a comment.